AOpen $model.subName Installationsanleitung

Table of Contents Table of ContentsTable of Contents ... 1 1.1 A Than

Installing CPU and System Fans Plug the CPU fan cable to the 3-pin CPUFAN connector. If you have chassis fan, you can also plug it in SYSFAN1 or SYSFA

Installing Memory Modules DIMM slots are designed in black which are very easy to recognize. Insert the module straight down to the DIMM slot with bot

Connecting IDE and Floppy Cables Connect the 34-pin floppy cable and 40-pin, 80-wire IDE cable to floppy connector and IDE connector. Be careful of th

Connecting Front Panel Cable Attach the power LED, speaker and reset switch connectors to the corresponding pins. If you enable “Suspend Mode” item in

Connecting ATX Power Cables This motherboard comes with a 20-pin and 4-pin ATX power connector as shown below. Make sure you plug them in the right di

3.3 Other Installation for Your Reference Setting CPU Voltage and Frequency Setting CPU Core Voltage This motherboard supports Voltage ID (VID) functi

Connecting AGP 4X Expansion Slot s651m provide an AGP 4X slot. The AGP 4X is a bus interface targeted for high-performance 3D graphic, and the data tr

Connecting CNR (Communication and Network Riser) Expansion Slot CNR is a riser card specification to replace the AMR (Audio/Modem Riser) that supports

Connecting IrDA The IrDA connector can be configured to support wireless infrared module, with this module and application software such as Laplink or

10/100Mbps LAN Supported On the strength of 10/100Mbps LAN controller on board, this motherboard provides 10/100Mbps Ethernet for office and home use.

Connecting S/PDIF (Sony/Philips Digital Interface) ...24 Colored Coded Back Panel ...

Connecting COM2 This motherboard provides two serial ports. One of them is on back panel connector, and the other is on the upper left of board betwee

Connecting USB2.0 This motherboard provides six USB 2.0 ports to connect USB devices such as mouse, keyboard, modem, printer, etc. There are four port

Connecting Front Audio If the housing is designed with an audio port on the front panel, you’ll be able to connect onboard audio to front panel throug

Connecting CD_IN This connector is designed to connect CD Audio cable from CDROM or DVD drive to onboard sound. 23

Connecting S/PDIF (Sony/Philips Digital Interface) S/PDIF (Sony/Philips Digital Interface) is a newest audio transfer file format, which provides impr

Colored Coded Back Panel The onboard I/O devices have PS/2 Keyboard, PS/2 Mouse, RJ-45 LAN Connector, COM1, VGA port, Printer, USB, AC’97 sound and ga

LED Indication LED indication are AOpen’s considerate designs that aim at providing you friendly system information. STBY LED will light up when powe

3.4 Jumper Settings 1 1 Normal (default) 1 Clear CMOS 1 JP14 Clear CMOS Jumper Enable Disable (Default) JP28 PS2 KB/Mouse Wakeup

Chapter 4 Special Features and Utilities Chapter 4 Special Features and UtilitiesOther Useful Features With excellent design ability of R&D team

Chapter 5 Setting BIOS Chapter 5 Setting BIOSIntroduction System parameters can be modified by going into BIOS Setup menu; this menu allows you to c

1.1 A Thank-you Note Before You Get Start First of all, we would like to express our gratitude for purchasing AOpen products. Once again, this mothe

How To Use Phoenix-Award™ BIOS Setup Program Generally, you can use arrow keys to highlight items that you want to choose, press <Enter> key to

BIOS Upgrade under Windows environment With outstanding R&D ability of AOpen, we now bring you a whole new BIOS Flash wizard ---- EzWinFlash. Wi

You may accomplish BIOS upgrade procedure with EzWinFlash according to following steps, and it’s STRONGLY RECOMMENDED to close all applications befo

Vivid BIOS technology Have you been fed up with the conservative and immutable POST screen? Let’s rule out the tradition idea that POST screen are s

Chapter 6 Installing Drivers Chapter 6 Installing Drivers You may think that installing drivers and utilities would be a repeated task of going thro

35 Once clicking “GO”, EzInstall will run the installing procedure automatically, and prompt a reboot dialog (Some drivers or utilities may skip th

6.2 Installing Utilities Installing Utilities is virtually the same as installing drivers. AOpen provides you many friendly and powerful utilities to

Chapter 7 Troubleshooting Chapter 7 Troubleshooting 37

Chapter 8 Technical Support Dear Customer, Chapter 8 Technical Support Thanks for choosing AOpen products. We invite you to register at http://www.ao

Model Name and BIOS Version Model name and BIOS version can be found on upper left corner of first boot screen (POST screen). For example: Copyr

41.2 Features of This Manual To help you grab the useful information of this motherboard and aware of certain conditions that you might need to kno

Technical Support Technical Support 40 40

5 Chapter 2 Introduction to This Motherboard 2.1 How does your motherboard look like? 1. SYSFAN1 Connector 15. Front Audio Connector 2

2.2 Specification Here is the main function of your motherboard. Models s651m CPU Intel Pentium 4 CPU Socket 478 400/533MHz Chipset Intel 651/962L

2.3 Block Diagram SIS 651 chipset DIMM Sockets x2 DDR333/266 RAM Up to 2GB Socket 478 Intel Pentium 4 CPU 400/533MHz System

Chapter 3 Hardware Installation Chapter 3 Hardware Installation3.1 Quick Installation Procedure 1. Installing CPU 2. Installing CPU

3.2 Installation You Have to Know Installing CPU This socket supports FC-PGA2 package CPU, which is the latest CPU package developed by Intel. Other f