AOpen 4-Port 10/100Mbps Ethernet Broadband Router Bedienungsanleitung PDF herunterladen (Seite 10)

EE400-R GigaFast Ethernet.

P 9

Chapter 2 Installation

ttach the power cord into the oulet first and follow the sections below to setup the WAN/LAN connection.

2.1 Hardware Connection to WAN

Connect the network cable from the Cable/ DSL modem to the WAN port of the EE400-R (Figure 2-1). If

the Link/Act light is off, check that the power and the network cable between the Cable/DSL modem and

WAN port are plu

ed in correctl

(

Please refer to Appendix C for detailed cablin

and pin assi

nment

)

Figure 2-1 The hardware connection of WAN interface for EE400-R.

2.2 Hardware Connection to LAN

Connect the network cable from

our computer’s Ethernet port to one of EE400-R’s 4 LAN ports

(

ure 2-2

)

. If it is correctl

connected, the co

respondin

Link/Act li

ht will be lit.

ure 2-2 Dia

ram of connections between router and computers.

** If you are connecting the LAN port to another hub or switch, use a crossover RJ-45 cable.**

Once everything is connected correctly, hold down the reset button for 5 seconds to ensure that the

EE400-R is in factory default condition.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 53 54

Keine Kommentare

AOpen 4-Port 10/100Mbps Ethernet Broadband Router Bedienungsanleitung Seite 10